H3C Technologies H3C SecBlade SSL VPN Cards - Manual (Page 51)

45
Restoring the BootWare Program File
Restoring the entire BootWare program file on the BootWare menu
To restore the entire BootWare program file, first restore the basic segment and then the extended
segment.
1. Select 2 on the BootWare operation menu to restore the backup BootWare program file on the
Flash to the CF card. A question is displayed:
Will you restore the Basic BootWare? [Y/N]
2. Enter Y.
Begin to restore Normal Basic BootWare....................
Done!
By now, the basic segment has been restored.
Then, a question is displayed:
Will you restore the Extend BootWare? [Y/N]
3. Enter Y.
Begin to restore Normal Extend BootWare....................
Done!
By now, the extended segment has been restored.
Restoring the entire BootWare program file at the CLI
NOTE:
ACG and IPS cards do not support BootWare program file restoration at the CLI.
You can use the following command to restore the entire BootWare program file.
bootrom restore
This command will restore bootrom file, Continue? [Y/N]:y
Now restoring bootrom, please wait...
Restore bootrom! Please wait...
Read backup basic bootrom completed!
Restore basic bootrom completed!
Read backup extend bootrom completed!
Restore extend bootrom completed!
Restore bootrom completed!