H3C Technologies H3C SecBlade SSL VPN Cards - Manual (Page 45)

39
# Download the main.bin file from the SecBlade card to the PC and save it as main_bac.bin.
ftp> get main.bin main_bac.bin
200 Port command okay.
150 Opening BINARY mode data connection for main.bin.
226 Transfer complete.
FTP: 11673608 byte(s) received in 12.735 second(s), 916.00K byte(s)/sec
ftp> quit
NOTE:
•
When you download an application file, if the file name already exists on the PC, you will be prompted
whether to overwrite the existing file. You need to enter Y or N to make a confirmation.
• You can back up configuration files in the way you back up application files.
Maintaining Files
You can maintain files on the file control submenu or at the CLI.
Maintaining Files on the File Control Submenu
You can modify the type of an application file, display all files, and delete a file on the file control
submenu.
Select 4 on the main menu to enter the file control submenu as follows:
===============================================
|Note:the operating device is cfa0 |
| <1> Display All File(s) |
| <2> Set Application File type |
| <3> Delete File |
| <0> Exit To Main Menu |
=============================================================
Enter your choice(0-3):
Displaying all files
Select 1 on the file control submenu. The following information is displayed:
Display all file(s) in cfa0:
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
=======================================================================
|NO. Size(B) Time Type Name |
|1 10129712 Apr/11/2007 05:39:50 B cfa0:/main.bin |
|2 1227 May/11/2007 16:25:52 N/A cfa0:/startup.cfg |
|3 2294 May/11/2007 14:47:32 N/A cfa0:/~/startup.cfg |
|4 2094 May/11/2007 13:47:34 N/A cfa0:/~/startup_bac.cfg |
=======================================================================
Modifying a file type
You can modify the type of application files of type M, B or N/A except type S on the file control
submenu, or at the CLI after the SecBlade card boots.