Introduction to the bootware menu, Main menu – H3C Technologies H3C SecBlade SSL VPN Cards User Manual
Page 25
19
NOTE:
Before performing operations on the SecBlade card of an S5800 series switch, you need to first log in to
the card at the switch side as follows:
Press CTRL+K to quit.
Connected to SubSlot3!
Introduction to the BootWare Menu
Main Menu
After the above configurations are completed and the SecBlade card is powered on, the card first
performs system initialization. After system initialization, the following information is displayed on the
configuration terminal:
NOTE:
For different SecBlade cards or different versions of BootWare programs, the information displayed on the
configuration terminal may slightly differ.
System start booting...
Booting Normal Extend BootWare....
********************************************************
* *
* SecBlade BootWare, Version 1.12 *
* *
********************************************************
Copyright (c) 2004-2007 Hangzhou H3C Technologies Co., Ltd.
Compiled Date : Jul 27 2007
CPU Type : XXX
CPU L1 Cache : 32KB
CPU Clock Speed: 1000MHz
Memory Type : DDR2 SDRAM
Memory Size : 1024MB
Memory Speed : 533MHz
BootWare Size : 1024KB
Flash Size : 4MB
cfa0 : 244MB
CPLD Version : 135.0
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to enter extended boot menu...