H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 87)

79
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
==========================================================================
|NO. Size(B) Time Type Name |
|1 2586 Jul/30/2010 05:33:04 N/A cfa0:/system.xml |
|2 39709988 Jul/30/2010 06:00:54 M cfa0:/wx6103.bin |
|3 1094 Jul/30/2010 04:40:18 N/A cfa0:/startup.cfg |
============================================================================
To set an application file type
Step1 Select 2 in the file control submenu. The following information appears:
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
================================================================================
|NO. Size(B) Time Type Name |
|1 39709988 Jul/30/2010 06:00:54 M cfa0:/wx6103.bin |
|0 Exit |
================================================================================
Enter file No:
Step2 Enter the file number at the prompt above. In this example, type 1 for wx6103.bin, and press Enter. The
system prompts you to specify a new file type:
Modify the file attribute:
================================================================================
|<1> +Main |
|<2> -Main |
|<3> +Backup |
|<4> -Backup |
|<0> Exit |
================================================================================
Enter your choice(0-4)
Step3 Select 1 for +Main (set to M), 2 for –Main (remove the current M attribute), 3 for +Backup (set to B), or
4 for –Backup (remove the current B attribute). For more information about the file types, see ”
Application
files .”
To remove a file
Step1 Select 3 in the file control submenu. The following information appears:
Deleting the file in cfa0:
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
==========================================================================
|NO. Size(B) Time Type Name |
|1 2586 Jul/30/2010 05:33:04 N/A cfa0:/system.xml |
|2 39709988 Jul/30/2010 06:00:54 M cfa0:/wx6103.bin |
|3 1094 Jul/30/2010 04:40:18 N/A cfa0:/startup.cfg |
|0 Exit |
==========================================================================
Enter file No:
Step2 Type a file number and press Enter. The system asks you to confirm your operation.
The file you selected is cfa0:/startup.cfg,Delete it? [Y/N]
Step3 Enter Y for confirmation. The following message appears, indicating the file was successfully deleted.
Deleting..........Done!