H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 69)

61
Ordering the 10GE interface module
Table 34 Ordering information for the 10GE interface module
Model Quantity Remarks
EWPX1XP1P 1 Optional
EWPX1XP2P 1 Optional
Ordering the optical modules
SFP optical module (EWPX1G24XA0)
An EWPX1G24XA0 module provides four SFP GE ports. The following SFP modules are available:
• 1000BASE-SX (SFP module)
• 1000BASE-LX (SFP module)
Table 35 Technical specifications for the GE optical modules
Description
Item
SFP module,
short-haul
multi-mode
(850 nm)
SFP module,
medium-haul
single-mode
(1310 nm)
SFP
module,
long-haul
(1310 nm)
SFP module,
long-haul
(1550 nm)
SFP module,
ultra-long-haul
(1550 nm)
Connector type LC
Maximum
transmission
distance
0.55 km
(0.34 miles)
10 km
(6.21 miles)
40 km
(24.86 miles)
40 km
(24.86
miles) 70 km (43.50 miles)
Central
wavelength
850 nm 1310 nm 1310 nm 1550 nm 1550 nm
Min. –9.5 dBm –9 dBm –2 dBm –4 dBm –4 dBm Optical
transmit
power
Max. 0 dBm –3 dBm 5 dBm 1 dBm 2 dBm
Receive
sensitivity
–17 dBm –20 dBm –23 dBm –21 dBm –22 dBm
Working mode 1000 Mbps full duplex mode
Ordering the XFP optical module (10GE interface module)
An EWPX1XP1P module provides one 10GE XFP port, while an EWPX1XP2P module provides two 10GE
XFP ports. The following XFP modules are available:
• 10GBASE-SX (XFP module)
• 10GBASE-LX (XFP module)
• 10GBASE-LH40 (XFP module)
• 10GBASE-LH80 (XFP module)