H3C Technologies H3C WX6000 Series Access Controllers User Manual
Page 79
71
Enter your choice(0-5):
NOTE:
After downloading files with a changed baud rate, timely change the baud rate back to 9,600 bps in
HyperTerminal to ensure the normal display on the console screen when the system boots or reboots.
Upgrading the BootWare through the management Ethernet
interface
Follow these steps to upgrade the BootWare through the management Ethernet interface:
Step1
Enter the BootWare main menu (see “
.”) and select 7 to enter the BootWare operation
submenu. For more information about this menu, see “
Step2
Select 4 in the BootWare operation submenu to enter the BootWare operation Ethernet interface
submenu:
=====================
|<1> Update Full BootWare |
|<2> Update Extend BootWare |
|<3> Update Basic BootWare |
|<4> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
================================================================================
Enter your choice(0-4):
Step3
Select 4 in the BootWare operation Ethernet interface submenu. The system prompts you to modify the
network parameters.
============================
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
================================================================================
Protocol (FTP or TFTP) :tftp
Load File Name :wx6103.bin
Target File Name :wx6103.bin
Server IP Address :192.168.0.179
Local IP Address :192.168.0.125
Gateway IP Address :192.168.0.1
NOTE:
•
The load file name and target file name must not exceed 50 bytes.
•
When configuring a parameter, you can enter a new value directly, or press Enter to accept the default
value that follows a colon. Type . to clear the current input, - to return to the previous parameter field, and
Ctrl+D to quit from the parameter configuration interface.
•
The WX6103 access controller supports only the 10/100/1000Base-TX out-of-band management
Ethernet interface for application upgrade.
After modification of the parameters, the system display returns to the BootWare operation Ethernet
interface submenu.