H3C Technologies H3C MSR 30 - Manual (Page 71)

63
Loading...................................................................
..........................................................................
..........Done!
22165484 bytes downloaded!
Updating File cfa0:/update.bin
After downloading the file, enter the file name to start the upgrade process:
Updating File main.bin........
Update Success!
Step4 Enter 0 to return to the main BootWare menu. Enter 1 to boot the system from the Flash memory.
Step5 Set the upgraded application program to the main application file, namely, the default boot file of the
system. Enter 4 when the above information appears.
============================================================
|Note:the operating device is cfa0 |
|<1> Display All File(s) |
|<2> Set Application File type |
|<3> Set Configuration File type |
|<4> Delete File |
|<0> Exit To Main Menu |
==========================================================================
Enter your choice(0-4):2
Enter the file control submenu and enter 2 to set the application file type.
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
==========================================================================
|NO. Size(B) Time Type Name |
|1 22165484 Dec/20/2007 09:18:10 S cfa0:/update.bin |
|2 22165484 Dec/20/2007 09:42:28 M cfa0:/main.bin |
|0 Exit |
==========================================================================
Enter file No:1
Enter the number of the file name to be modified.
Modify the file attribute:
==========================================================================
|<1> +Main |
|<2> -Main |
|<3> +Backup |
|<4> -Backup |
|<0> Exit |
==========================================================================
Enter your choice(0-4):1
Enter 1 to set the selected application program to the main application file, namely, the default boot file
of the system.
Step6 Enter 0 to return to the main BootWare menu. Enter 1 to boot the system.