beautypg.com

H3C Technologies H3C MSR 30 User Manual

Page 49

background image

41

Figure 44 Local configuration connection interface

Step2

Set terminal parameters. As shown in the following table, in the properties dialog box of the serial

interface, set the baud rate to 9600, data bit to 8, no parity check, stop bit to 1, and flow control to none.
Then, click OK to return to the HyperTerminal window.

Figure 45 Setting serial interface parameters

Step3

Set HyperTerminal properties. Select File > Properties > Settings from the HyperTerminal to enter the

properties setting window as shown in the following figure. Set the terminal emulation type to VT100 or

auto detect, and click OK to return to the HyperTerminal window.

See also other documents in the category H3C Technologies Routers: