Ethernet interface submenu, File control submenu, Submenu, refer to – H3C Technologies H3C MSR 30 User Manual
Page 67: S about the submenu, refer to, File, Control submenu
59
Table 27 BootWare serial interface submenu
Item Description
<1> Download Application Program To SDRAM And
Run
Download an application program to SDRAM and run
it.
<2> Update Main Application File
Upgrade the main application program.
<3> Update Backup Application File
Upgrade the backup application program.
<4> Update Secure Application File
Upgrade the secure application program.
<5> Modify Serial Interface Parameter
Modify serial interface parameters.
<0> Exit To Main Menu
Return to the main BootWare menu.
Ethernet interface submenu
Enter 3 in the main BootWare menu to enter the Ethernet interface submenu. The system displays:
=========================
|Note:the operating device is cfa0 |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Update Backup Application File |
|<4> Update Secure Application File |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|
==========================================================================
Enter your choice(0-5):
The Ethernet interface submenu is described as follows:
Table 28 Ethernet interface submenu
Item Description
<1> Download Application Program To SDRAM And
Run
Download the application program to SDRAM and
run it.
<2> Update Main Application File
Upgrade the main application program.
<3> Update Backup Application File
Upgrade the backup application program.
<4> Update Secure Application File
Upgrade the secure application program.
<5> Modify Ethernet Parameter
Modify Ethernet interface parameters.
<0> Exit To Main Menu
Return to the main BootWare menu.
File control submenu
Enter 4 in the main BootWare menu to enter the file control submenu. Through this submenu, you can
view application program file type in the memory, modify a file name, and delete a file.
==============================
|Note:the operating device is cfa0 |
|<1> Display All File(s) |
|<2> Set Application File type |
|<3> Set Configuration File type |