H3C Technologies H3C MSR 30 - Manual (Page 68)

60
|<4> Delete File |
|<0> Exit To Main Menu |
==========================================================================
Enter your choice(0-4):
The submenu is described as follows:
Table 29 File control submenu
Item Description
<1> Display All File Display all files.
<2> Set Application File type Set an application file type.
<3> Set Configuration File type Set a configuration file type.
<4> Delete File Delete a file.
<0> Exit To Main Menu Return to the main BootWare menu.
BootWare operation submenu
Enter 7 in the main BootWare menu to enter the BootWare operation submenu:
=================================================
|Note:the operating device is cfa0 |
|<1> Backup Full BootWare |
|<2> Restore Full BootWare |
|<3> Update BootWare By Serial |
|<4> Update BootWare By Ethernet |
|<0> Exit To Main Menu |
==========================================================================
Enter your choice(0-4):
The submenu is described as follows:
Table 30 BootWare operation submenu
Item Description
<1> Backup Full BootWare Back up the full BootWare.
<2> Restore Full BootWare Restore the full BootWare.
<3> Update BootWare By Serial Upgrade BootWare through a serial interface
<4> Update BootWare By Ethernet Upgrade BootWare through an Ethernet interface
<0> Exit To Main Menu Return to the Main BootWare menu
Upgrading an Application Program Through an
Ethernet Interface
Enter 3 in the BootWare menu to enter the Ethernet interface submenu. For details about the submenu,
refer to BootWare Submenus on page 58 .