H3C Technologies H3C MSR 30 - Manual (Page 32)

24
Table 20 Physical dimensions of the MSR 30 routers
Model
Physical dimension
(H × W × D) (excluding feet and mounting brackets)
MSR 30-10 44.2 × 442 × 360 mm (1.74 × 17.4 × 14.17 in.)
MSR 30-11 44.2 × 442 × 360 mm (1.74 × 17.4 × 14.17 in.)
MSR 30-11E 44.2 × 442 × 360 mm (1.74 × 17.4 × 14.17 in.)
MSR 30-11F 44.2 × 442 × 360 mm (1.74 × 17.4 × 14.17 in.)
MSR 30-16 44.2 × 442 × 441.8 mm (1.74 × 17.4 × 17.39 in.)
MSR 30-20 44.2 × 442 × 441.8 mm (1.74 × 17.4 × 17.39 in.)
MSR 30-40 88.2 × 442 × 422.3 mm (3.47 × 17.4 × 16.62 in.)
MSR 30-60 132 × 442 × 421.8 mm (5.20 × 174 × 16.61 in.)
Install the router after you have completed the installation preparations.
The router can be installed:
• On a workbench
• In a cabinet
Installing the Router on a Workbench
In many circumstances, you may not own a 19-inch standard rack. Usually, the router will be installed on
a clean workbench. The operations are very simple, but still, you should be aware of the following items:
• Ensure the stability and well-grounding of the workbench.
• Leave a space of 10 cm (3.9 in.) around the router for heat dissipation.
• Do not place heavy objects on the router to avoid extruding the device and affecting heat
dissipation performance.
Installing the Router in a Cabinet
You can install an MSR 30 router in a 19-inch standard cabinet, such as an H3C N68 rack. For the
installation of an N68 rack, refer to N68 Cabinet Installation Guide.
Do not place heavy objects on the router to avoid extruding the device and affecting heat dissipation
performance.