Startup process – H3C Technologies H3C MSR 50 User Manual
Page 45
37
•
After completing the power-on self-test (POST), the system asks you to press
prompt appears, you may proceed to configure the router.
Startup Process
After power-on or during the reboot process, the following information is displayed on the terminal:
System application is starting...
Booting Normal Extend BootWare........
**************************************************************************
* *
* H3C MSR50-40 BootWare, Version 1.08 *
* *
**************************************************************************
Copyright (c) 2004-2008 Hangzhou H3C Technologies Co., Ltd.
Compiled Date : Apr 16 2008
CPU Type : MPC7448
CPU L1 Cache : 32KB
CPU L2 Cache : 1024KB
CPU Clock Speed : 1700MHz
Memory Type : DDR2 SDRAM
Memory Size : 1024MB
Memory Speed : 533MHz
BootWare Size : 1024KB
Flash Size : 4MB
cfa0 Size : 247MB
CPLD Version : 1.0
PCB Version : 2.0
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Press Ctrl+B to enter the extended Boot ROM menu. Otherwise, the system goes into the program
decompression process.
NOTE:
Press Ctrl+B within six seconds after “Press Ctrl+B to enter extended boot menu...” appears to enter the
extended Boot ROM menu. Otherwise, the system goes into the program decompression process. You
need to restart the router if you want to enter the extended Boot ROM menu after the decompression
process.
Starting to get the main application file--cfa0:/mainmpug2.bin!.............
............................................................................
.......................................................................
The main application file is self-decompressing
The booting information is displayed until the following prompt appears:
Press ENTER to get started.