H3C Technologies H3C MSR 50 - Manual (Page 40)

32
CAUTION:
•
The design of demountable slide rail greatly facilitates users to extend their services. The slide rail is fixed
on chassis through special structure. When you need to install a DFIC, you only need to uninstall the rail
and install the module. The rail may deviate out of external force when you install a DFIC, thus the DFIC
on the other side cannot be installed normally. You can right the rail manually and then install the DFIC
normally.
• When installing a DFIC, it is recommended that you fasten the release screw first and then install the
DFIC M on the other side of the rail.
Removing Slide Rail
Figure 29 Unfasten the screw
Figure 30 Remove the slide rail
NOTE:
Refer to the installation and removal of FIC slide rail for those of SIC slide rail.