Sfp+ port – H3C Technologies H3C S5820V2 Series Switches User Manual
Page 57
49
NOTE:
USB devices from different vendors vary in compatibility and driver. H3C does not guarantee correct
operation of USB devices from other vendors on the switch. If a USB device does not operate correctly on
the switch, replace it with one from another vendor.
SFP+ port
The S5830V2-24S, S5820V2-48S, S5820V2-52QF, S5820V2-52QF-U, and S5820V2-54QS-GE
switches provide SFP+ ports. You can install the SFP transceiver modules in
, the SFP+ transceiver
, and the SFP+ DAC cables in
in the SFP+ ports as needed.
Table 11 SFP transceiver modules available for the SFP+ ports
SFP transceiver
module
Central
wavelength
(nm)
Connector
Cable/Fiber
type and
diameter
(μm)
Modal
bandwidth
(MHz × km)
Max transmission
distance
SFP-GE-T N/A RJ-45
Category-5
twisted pair
N/A
100 m (328.08 ft)
SFP-GE-SX-MM85
0-A
850 LC
Multi-mode,
50/125
500
550 m (1804.46 ft)
400
500 m (1640.42 ft)
Multi-mode,
62.5/125
200
275 m (902.23 ft)
160
220 m (721.78 ft)
SFP-GE-LX-SM131
0-A
1310 LC
Single-mode,
9/125
N/A
10 km (6.21 miles)
Multi-mode,
50/125
500 or 400
550 m (1804.46 ft)
Multi-mode,
62.5/125
500
550 m (1804.46 ft)
SFP-GE-LH40-SM1
310
1310 LC
Single-mode,
9/125
N/A
40 km (24.86 miles)
SFP-GE-LH40-SM1
550
1550 LC
Single-mode,
9/125
N/A
40 km (24.86 miles)
SFP-GE-LH70-SM1
550
1550 LC
Single-mode,
9/125
N/A
70 km (43.50 miles)
Table 12 SFP+ transceiver modules available for the SFP+ ports
SFP+
transceiver
module
Central
wavelength
(nm)
Connector
Fiber type
and
diameter
(μm)
Modal
bandwidth
(MHz × km)
Max transmission
distance
SFP-XG-SX-MM8
50-A
850 LC
Multi-mode,
50/125
2000
300 m (984.25 ft)
500
82 m (269.03 ft)
400
66 m (216.54 ft)