H3C Technologies H3C S5820V2 Series Switches - Manual (Page 48)

40
Figure 49 Left side panel
(1) Primary grounding point (2) Auxiliary grounding point 1
S5820V2-54QS-GE
Figure 50 Front panel
(1) 10/100/1000Base-T autosensing Ethernet port (2) 10/100/1000Base-T autosensing Ethernet port LED
(3) SFP+ port
(4) SFP+ port LED
(5) QSFP+ port (6) QSFP+ port LED
(7) System status LED (SYS)
Figure 51 Rear panel
(1) Grounding screw (auxiliary grounding point 2) (2) Management Ethernet port
(3) Console port (4) Fan tray slot 1
(5) Fan tray slot 2 (6) Power module slot 1
(7) Power module slot 2 (8) LINK LED for the management Ethernet port
(9) ACT LED for the management Ethernet port (10) USB port
The S5820V2-54QS-GE switch comes with the power module slots empty and the filler modules for the
slots as accessories. You can install one or two power modules for the switch as needed. In Figure 51 , two
LSVM1AC650 power modules are installed. For more information about installing and removing a
power module, see "
Installing/removing a power module ."