H3C Technologies H3C S5820V2 Series Switches - Manual (Page 38)

30
4. Verify that you can manage all member switches as if they were one node.
5. Display the running status of the IRF fabric by using the commands in Table 5 .
Table 5 Displaying and maintaining IRF configuration and running status
Task Command
Display information about the IRF fabric. display irf
Display all members’ IRF configurations that take
effect at a reboot.
display irf configuration
Display IRF fabric topology information. display irf topology
NOTE:
To avoid IP address collision and network problems, configure a minimum of one multi-active detection
(MAD) mechanism to detect the presence of multiple identical IRF fabrics and handle collisions. For more
information about MAD detection, see H3C S5830V2 & S5820V2 Switch Series IRF Configuration Guide.