H3C Technologies H3C S5820V2 Series Switches - Manual (Page 43)

35
Figure 37 Rear panel
(1) Grounding screw (auxiliary grounding point 2) (2) Management Ethernet port
(3) Console port (4) Fan tray slot 1
(5) Fan tray slot 2 (6) Power module slot 1
(7) Power module slot 2 (8) LINK LED for the management Ethernet port
(9) ACT LED for the management Ethernet port (10) USB port
The S5820V2-48S switch comes with the power module slots empty and the filler modules for the slots as
accessories. You can install one or two power modules for the switch as needed. In
Figure 37 , two
LSVM1AC300 power modules are installed. For more information about installing and removing a
power module, see " Installing/removing a power module ."
The S5820V2-48S switch also comes with the fan tray slots empty. You must install two fan trays of the
same model for the switch. In
Figure 37 , two LSWM1FANSC fan trays are installed. For more information
about installing and removing a fan tray, see " Installing/removing a fan tray ."
Figure 38 Left side panel
(1) Primary grounding point (2) Auxiliary grounding point 1
S5820V2-52QF
The S5820V2-52QF switch has three models: LS-5820V2-52QF, LS-5820V2-52QF-H3, and
LS-5820V2-52QF-H5.