H3C Technologies H3C S5820V2 Series Switches - Manual (Page 45)

37
Figure 41 Real panel (LS-5820V2-52QF-H3)
(1) USB port (2) Grounding screw (auxiliary grounding point 2)
(3) Barcode (4) Product code
(5) Fan tray slot 1 (6) Fan tray slot 2
(7) Power module slot 1 (8) Power module slot 2
(9) Console port (10) LINK LED for the management Ethernet port
(11) Management Ethernet port (12) ACT LED for the management Ethernet port
Figure 42 Rear panel (LS-5820V2-52QF-H5)
(1) USB port (2) Grounding screw (auxiliary grounding point 2)
(3) Barcode (4) Product code
(5) Fan tray slot 1 (6) Fan tray slot 2
(7) Power module slot 1 (8) Power module slot 2
(9) Console port (10) LINK LED for the management Ethernet port
(11) Management Ethernet port (12) ACT LED for the management Ethernet port
The S5820V2-52QF switch comes with the power module slots empty and the filler modules for the slots
as accessories. You can install one or two power modules for the switch as needed. In
Figure 40
and Figure 41 , two LSVM1AC300 power modules are installed. For more information about installing
and removing a power module, see " Installing/removing a power module ."
The S5820V2-52QF switch also comes with the fan tray slots empty. You must install two fan trays of the
same model for the switch. In
Figure 40 and Figure 41 , two LSWM1FANSC fan trays are installed. For
more information about installing and removing a fan tray, see " Installing/removing a fan tray ."
1
2
3 4 5 6 7 8
9
10
11
12
9
10
5 6 7 8
11
12
3 4
1
2