H3C Technologies H3C S5820V2 Series Switches - Manual (Page 17)

9
Figure 8 Attaching the rear mounting brackets/chassis rails/grounding cable to the chassis
Figure 9 Attaching the front mounting brackets/chassis rails to the chassis
NOTE:
•
H3C recommends that you use the primary grounding point or auxiliary grounding point 1 because the
grounding cable and grounding screw that come with the switch are suitable only for these two
grounding points.
• To use auxiliary grounding point 2 on the S5820V2-48S, S5820V2-52QF, S5820V2-52QF-U,
S5820V2-52Q, or S5820V2-54QS-GE switch, prepare a grounding cable yourself.
Attaching the slide rails to the rack
1. Identify the rack attachment position for the slide rails.