H3C Technologies H3C S5820V2 Series Switches - Manual (Page 47)

39
Figure 46 Left side panel
(1) Primary grounding point (2) Auxiliary grounding point 1
S5820V2-52Q
Figure 47 Front panel
(1) 1/10GBase-T autosensing Ethernet port (2) 1/10GBase-T autosensing Ethernet port LED
(3) QSFP+ port (4) QSFP+ port LED
(5) System status LED (SYS)
Figure 48 Rear panel
(1) Grounding screw (auxiliary grounding point 2) (2) Management Ethernet port
(3) Console port (4) Fan tray slot 1
(5) Fan tray slot 2 (6) Power module slot 1
(7) Power module slot 2 (8) LINK LED for the management Ethernet port
(9) ACT LED for the management Ethernet port (10) USB port
The S5820V2-52Q switch comes with the power module slots empty and the filler modules for the slots
as accessories. You can install one or two power modules for the switch as needed. In Figure 48 , two
LSVM1AC650 power modules are installed. For more information about installing and removing a
power module, see " Installing/removing a power module ."
The S5820V2-52Q switch also comes with the fan tray slots empty. You must install two fan trays of the
same model for the switch. In Figure 48 , two LSWM1HFANSC fan trays are installed. For more
information about installing and removing a fan tray, see " Installing/removing a fan tray ."
1 2 3 4 5 6 7
8 9 10