beautypg.com

H3C Technologies H3C S6800 Series Switches User Manual

Page 51

background image

43

[SwitchA-Vlan-interface3] ipv6 address 2::1 64

# Create VRRP group 2, and set its virtual IPv6 addresses to FE90::10 and 2::10.

[SwitchA-Vlan-interface3] vrrp ipv6 vrid 2 virtual-ip fe90::10 link-local

[SwitchA-Vlan-interface3] vrrp ipv6 vrid 2 virtual-ip 2::10

# Enable Switch A to send RA messages, so hosts in VLAN 3 can learn the default gateway
address.

[SwitchA-Vlan-interface3] undo ipv6 nd ra halt

2.

Configure Switch B:
# Configure VLAN 2.

system-view

[SwitchB-vlan2] port fortygige 1/0/5

[SwitchB-vlan2] quit

[SwitchB] interface vlan-interface 2

[SwitchB-Vlan-interface2] ipv6 address fe80::2 link-local

[SwitchB-Vlan-interface2] ipv6 address 1::2 64

# Create VRRP group 1, and set its virtual IPv6 addresses to FE80::10 and 1::10.

[SwitchB-Vlan-interface2] vrrp ipv6 vrid 1 virtual-ip fe80::10 link-local

[SwitchB-Vlan-interface2] vrrp ipv6 vrid 1 virtual-ip 1::10

# Enable Switch B to send RA messages, so hosts in VLAN 2 can learn the default gateway
address.

[SwitchB-Vlan-interface2] undo ipv6 nd ra halt

[SwitchB-Vlan-interface2] quit

# Configure VLAN 3.

[SwitchB] vlan 3

[SwitchB-vlan3] port fortygige 1/0/6

[SwitchB-vlan3] quit

[SwitchB] interface vlan-interface 3

[SwitchB-Vlan-interface3] ipv6 address fe90::2 link-local

[SwitchB-Vlan-interface3] ipv6 address 2::2 64

# Create VRRP group 2, and set its virtual IPv6 addresses to FE90::10 and 2::10.

[SwitchB-Vlan-interface3] vrrp ipv6 vrid 2 virtual-ip fe90::10 link-local

[SwitchB-Vlan-interface3] vrrp ipv6 vrid 2 virtual-ip 2::10

# Assign Switch B a higher priority than Switch A in VRRP group 2, so Switch B can become the
master in the group.

[SwitchB-Vlan-interface3] vrrp ipv6 vrid 2 priority 110

# Enable Switch B to send RA messages, so hosts in VLAN 3 can learn the default gateway

address.

[SwitchB-Vlan-interface3] undo ipv6 nd ra halt

3.

Verify the configuration:
# Display detailed information about the VRRP groups on Switch A.

[SwitchA-Vlan-interface3] display vrrp ipv6 verbose

IPv6 Virtual Router Information:

Running Mode : Standard

Total number of virtual routers : 2

Interface Vlan-interface2

VRID : 1 Adver Timer : 100

This manual is related to the following products: