H3C Technologies H3C S10500 Series Switches User Manual

Page 69

[Device] acl number 3001

[Device-acl-adv-3001] rule permit ip destination 192.168.0.2 0

[Device-acl-adv-3001] quit

# Create advanced ACL 3002, and configure a rule to match packets with destination IP address
192.168.0.3.

[Device] acl number 3002

[Device-acl-adv-3002] rule permit ip destination 192.168.0.3 0

[Device-acl-adv-3002] quit

# Create a class named classifier_dbserver, and use ACL 3000 as the match criterion in the class.

[Device] traffic classifier classifier_dbserver

[Device-classifier-classifier_dbserver] if-match acl 3000

[Device-classifier-classifier_dbserver] quit

# Create a class named classifier_mserver, and use ACL 3001 as the match criterion in the class.

[Device] traffic classifier classifier_mserver

[Device-classifier-classifier_mserver] if-match acl 3001

[Device-classifier-classifier_mserver] quit

# Create a class named classifier_fserver, and use ACL 3002 as the match criterion in the class.

[Device] traffic classifier classifier_fserver

[Device-classifier-classifier_fserver] if-match acl 3002

[Device-classifier-classifier_fserver] quit

# Create a behavior named behavior_dbserver, and configure the action of setting the local precedence
value to 4.

[Device] traffic behavior behavior_dbserver

[Device-behavior-behavior_dbserver] remark local-precedence 4

[Device-behavior-behavior_dbserver] quit

# Create a behavior named behavior_mserver, and configure the action of setting the local precedence
value to 3.

[Device] traffic behavior behavior_mserver

[Device-behavior-behavior_mserver] remark local-precedence 3

[Device-behavior-behavior_mserver] quit

# Create a behavior named behavior_fserver, and configure the action of setting the local precedence

value to 2.

[Device] traffic behavior behavior_fserver

[Device-behavior-behavior_fserver] remark local-precedence 2

[Device-behavior-behavior_fserver] quit

# Create a policy named policy_server, and associate classes with behaviors in the policy.

[Device] qos policy policy_server

[Device-qospolicy-policy_server] classifier classifier_dbserver behavior

behavior_dbserver

[Device-qospolicy-policy_server] classifier classifier_mserver behavior

behavior_mserver

[Device-qospolicy-policy_server] classifier classifier_fserver behavior

behavior_fserver

[Device-qospolicy-policy_server] quit

# Apply the policy named policy_server to the incoming traffic of GigabitEthernet 1/0/1.

[Device] interface gigabitethernet 1/0/1

This manual is related to the following products: