H3C Technologies H3C S10500 Series Switches - Manual (Page 26)

18
Table 2 The value range for the match-criteria argument
Option Description
acl [ ipv6 ] { acl-number |
name acl-name }
Matches an ACL.
The acl-number argument ranges from 2000 to 3999 for an IPv4 ACL, 2000
to 3999 for an IPv6 ACL, and 4000 to 4999 for an Ethernet frame header
ACL.
The acl-name argument is a case-insensitive string of 1 to 63 characters, which
must start with an alphabetic letter from a to z (or A to Z), and to avoid
confusion, cannot be all.
any Matches all packets.
dscp dscp-list
Matches DSCP values.
The dscp-list argument is a list of up to eight DSCP values. A DSCP value can
be a number from 0 to 63 or any keyword in
Table 9 .
destination-mac mac-address Matches a destination MAC address.
customer-dot1p 8021p-list
Matches the 802.1p priority of the customer network.
The 8021p-list argument is a list of up to eight 802.1p priority values. An
802.1p priority ranges from 0 to 7.
service-dot1p 8021p-list
Matches the 802.1p priority of the service provider network.
The 8021p-list argument is a list of up to eight 802.1p priority values. An
802.1p priority ranges from 0 to 7.
ip-precedence
ip-precedence-list
Matches IP precedence.
The ip-precedence-list argument is a list of up to eight IP precedence values. An
IP precedence ranges from 0 to 7.
protocol protocol-name
Matches a protocol.
The protocol-name argument can be IP or IPv6.
qos-local-id local-id-value
Matches a local QoS ID, which ranges from 1 to 4095.
The local QoS IDs supported on the S10500 Switch Series are from 1 to 3999.
source-mac mac-address Matches a source MAC address.
customer-vlan-id { vlan-id-list
| vlan-id1 to vlan-id2 }
Matches the VLAN IDs of customer networks.
The vlan-id-list argument is a list of up to eight VLAN IDs. The vlan-id1 to
vlan-id2 specifies a VLAN ID range, where the vlan-id1 must be smaller than
the vlan-id2. A VLAN ID ranges from 1 to 4094.
service-vlan-id { vlan-id-list |
vlan-id1 to vlan-id2 }
Matches the VLAN IDs of ISP networks.
The vlan-id-list is a list of up to eight VLAN IDs. The vlan-id1 to vlan-id2
specifies a VLAN ID range, where the vlan-id1 must be smaller than the
vlan-id2. A VLAN ID ranges from 1 to 4094.
system-index index-value-list
Matches a pre-defined match criterion (system-index) for packets sent to the
control plane.
The index-value-list argument specifies a list of up to eight system indexes. The
system index range depends on your switch model.