Eneo NXD-2030PTZ1080IR - Manual (Page 70)

∇ HTTPS
For greater security, the network camera can be configured to use HTTPS (Hypertext Trans-
fer Protocol over SSL (Secure Socket Layer)). Then all communication that would otherwise
go via HTTP will instead go via an encrypted HTTPS connection.
• HTTPS Connection Policy: Choose the form of connection you wish to use from the
drop-down list for the administrator, Operator and Viewer to enable HTTPS connection
(set to HTTP by default).
– HTTP
– HTTPS
– HTTP & HTTPS
• Upload Certificate: To use HTTPS for communication with the network camera, an
official certificate issued by a CA (Certificate Authority) must be uploaded from your
PC. Provide the path to the certificate directly, or use the
Browse button to locate it.
Then click the Upload button.
Please refer to the home page of your preferred CA for information on where to send the
request. For more information, please see the online help.
When the settings are complete, click Save button to save the settings, or click Reset button
to clear all of the information you entered without saving it.
70