Eneo NXD-2030PTZ1080IR - Manual (Page 53)

– SD: Built-in SD card.
– CIFS: A file format for a NAS device.
– NFS: A file format for a NAS device.
NOTE 1: Common Internet File System (CIFS) is a remote file access protocol that
forms the basis for Windows file sharing, network printing, and various other
network services. CIFS requires a large number of request/response trans-
actions and its performance degrades significantly over high-latency WAN
links such as the Internet.
NOTE2: Network File System (NFS) is a network file system protocol, allowing a user
on a client computer to access files over a network in a manner similar to
how local storage is accessed. NFS, like many other protocols, builds on
the Open Network Computing Remote Procedure Call (ONC RPC) system.
The CIFS screen displays as below.
– Address: Enter IP address for NAS device.
– Remote Directory: Enter directory or folder location to be recorded in the NAS
device.
– Capacity: Enter the capacity of storage to be used. This must be less than the
total storage capacity.
– ID/Password: Enter ID and Password. The network camera will ask for these
whenever you access NAS device.
– Check: Press the Check button to check the validity of Device Setting data.
• Format: Click the Format button to format SD card.
• Device Information: Show current SD card information.
When the settings are complete, click Save button to save the settings, or click Reset button
to clear all of the information you entered without saving it.
53