Eneo NXD-2030PTZ1080IR - Manual (Page 66)

7) System Menu
• Dome Information: The system information provides essential information about the
dome if service is required. The information cannot be modified.
• System Menu setting: User can set the camera in auto-calibration mode
• Origin Check: If you find the dome in the wrong position during operation, execute
this origin check by clicking Origin Check button and the dome camera will return to
the right position after the origin check operation.
• Camera upgrade: User can upgrade AF module firmware remotely.
When the settings are complete, click Save button to save the settings, or click Reset button
to clear all of the information you entered without saving it.
66