Eneo NXD-2030PTZ1080IR - Manual (Page 65)

6) View Angle
• View Angle Setting:
– Tilt angle limit: This option is designed to limit the view angle as there is some
obstruction in zooming out on specific areas of the tilt angle.
– Flip:
∗ Off: The dome camera moves until 90 o vertically.
∗ Auto: When the camera reaches the floor directly above the moving object,
it will stop. At that time, release instantly and pull it down again to run the
auto-flip function. When you use the panning range, it is recommended to
use the flip mode to Auto.
When the settings are complete, click Save button to save the settings, or click Reset button
to clear all of the information you entered without saving it.
65