Eneo NXD-2030PTZ1080IR User Manual
Page 62
3) Pattern
Pattern is a series of pan, tilt, and zoom movements programmed by administrator or op-
erator. Up to 8 patterns may be programmed for the dome camera. Follow steps below to
program the Patterns:
1. Click the
Set button of desired Pattern number of Pattern Setting list, and move pan,
tile, and zoom using Control box. The movement history is automatically recorded.
2. Click
Done button after you completed the camera movement program.
3. Repeat step 1 for each desired Pattern number.
4. If you are not satisfied with the programed pattern, click
X button to clear the patternt.
5. You can edit title of each pattern number for easier recognition.
NOTE 1: Each Pattern can store up to 500 seconds of movements.
NOTE 2: The precentage total of 8 Patterns cannot exceed 100.
62