Eneo NXD-2030PTZ1080IR - Manual (Page 41)

∇ Tampering
This is used to trigger an event when camera tampering occurs, for example, obstruct the
camera with foreign material or move camera direction using external force. Select ”Enable
tampering” to activate the Tampering event.
• Dwell time: Determine how long the event will last from the point of detection.
• Event time: Time duration from tampering detection to tampering event trigger.
• Threshold: Determines sensitivity level to judge tampering. The samller the threshold
value, the more frequent tampering event trigger.
When the settings are complete, click Save button to save the settings, or click Reset button
to clear all of the information you entered without saving it.
41