Eneo NXD-2030PTZ1080IR - Manual (Page 58)

• General: Enter the name for a new event map.
• Event In: Select an event type in the drop-down list.
• Event Out:
– E-mail: Select the email addresses you want to notify via email that an event has
occurred.
– FTP: Select checkbox beside FTP to record and save images to an FTP server
when an event has occurred.
– Alarm out: Check this box to enable the alarm out.
– Audio Alert: Select an Audio Alert file as the Network Transmitter output when
audio alert event triggered. The Audio Alert file must first be configured on the
Event In page.
– XML Notification: It sends XML messages to an Notification server that listens
for these. The destination server must first be configured on the Event In page.
– Boost: When an event has occurred, the camera will boost the Frame rate and Bit
rate from the normal condition to this boosted level for the duration of the event.
Check the box to enable the Function.
– PTZ preset: Select the preset position you want to move at event. If you want to
move back to home position after the event, which is pre-defined in the Alarm Out
- PTZ Preset page, check ”Return to home position after event” box
– Record: Record video stream when an event has occurred. The Record option
must first be configured on the Event Out page.
– Notification Server: It sends notification messages to teh notification server that
listens for these. The destination server must first be configured on the Event In
page. Enter a message you want to send.
When the settings are complete, click Save button to save the settings, or click Reset button
to clear all of the information you entered without saving it.
58