ARM Electronics DVRHD - Manual (Page 59)

DVR User’s Manual
58
5.3.3 Playback Video
The remote monitoring software allows users to either view recorded video
from the DVR, or from the hard disk drive of the PC.
To access the Playback screen, click button on the main window
toolbar. There are three tabs in the Playback screen: ,
, and tabs. allows users to
play back from the DVR. enables users to playback a
recorded video file stored on the hard disk drive of the PC. is
provided for users to authenticate if the exported video is altered.
The DVR continues recording while playing back recorded video on the PC,
either remote playback or local playback.
5.3.3.1 Playback Remote Video
To view remote video, click on the main window toolbar, and then
tab. The screen will be displayed.
The and in the display the date and
time from which recorded video is available for playback.
To playback remote video segments, follow these steps:
• Choose in field for playback recorded video.
• In field, users can change the date and time either by typing desired numbers directly or using the arrow buttons.
To type directly:
Click on day, month and year of date field respectively, and type the
desired numbers directly. Follow above steps to adjust the hour, minute
and second of time field.
To use the arrow buttons:
Click on the arrow button next to the date field to display the calendar; then
click the left and right arrow at the top of the calendar to change the date.
Use up and down arrow next to the time field to change to the wanted time. • The other way to select date and time is by moving the blue sliding bar.
• Click to start the playback, or click to abort. Pages: 1 … 57 58 59 60 61 … 78 wrong Brand wrong Model non readable This manual is related to the following products: ARM HR Series VR Series See also other documents in the category ARM Electronics Car DVR: DVRCD120 (47 pages) ARM HR Series (12 pages) XR&HD480 Series (13 pages) VR OSD (67 pages) RDVR8A (60 pages) JDVR (53 pages) DVR4CD (61 pages) JHD (70 pages) RT8-16CD (100 pages) RT4CD (59 pages) XR&HD480 OSD (111 pages) Casino VCR800 (34 pages) Sitemap
desired numbers directly or using the arrow buttons.
To type directly:
Click on day, month and year of date field respectively, and type the
desired numbers directly. Follow above steps to adjust the hour, minute
and second of time field.
To use the arrow buttons:
Click on the arrow button next to the date field to display the calendar; then
click the left and right arrow at the top of the calendar to change the date.
Use up and down arrow next to the time field to change to the wanted time.
• The other way to select date and time is by moving the blue sliding bar.
• Click to start the playback, or click to abort.