ARM Electronics DVRHD - Manual (Page 28)

DVR User’s Manual
27
3.6.6 ezRecord Setup
This item aims to ease the complicated record settings, and to make the
setup much easier. Note that the item can be reached only when
is selected as the option for .
Select from and press ENTER, the
sub-menu appears as below figure:
ezRecord Setup
How Many Days To Record
Daytime Record
Night Record
Weekend Record
Average Normal PPS
Average Normal Quality 2 Days
Yes
Yes
Yes
3.75
Best
Follow these steps to Setup ezRecord:
• Select and press ENTER, then press
UP/DOWN to choose an option. The average normal PPS & Quality will
be adjusted automatically. The maximum of days depends of the size of
the installed HDD(s). In other words, the larger the size of the HDD
installed, the more days the unit can record.
• Move to and press ENTER. This item will determine
whether the DVR will record during daytime. If yes, use UP/DOWN to
select as to enable daytime recording; or select to disable.
• Repeat the same procedures through the 3rd and 4th item, respectively.
Note that will be inaccessible if Schedule> in is set to .
• Select and press ENTER, then press UP/DOWN
to make a choice. The will be computed
automatically.
• Select and press ENTER, then press
UP/DOWN to make a choice. The will be
computed automatically.
NOTE: The current number of connected cameras will affect the
recording quality automatically calculated through the Setup>. Therefore, once the number of connected cameras is
changed, the should be reset.
Record Info