ARM Electronics DVRHD - Manual (Page 31)

DVR User’s Manual
30
3.7 Event Setting
This menu allows users to determine the DVR’s behavior in response to
alarm events. In the Main menu, move the cursor to and
press ENTER. The following menu is displayed. Items in the Event Setup
menu are described in the following subsections.
Event Setup
Internal Buzzer
Event Icon
Email Notice
Email Attachment
Alert Notification Setup
Event Full Screen
Event Duration
Per Channel Config ON
ON
OFF
OFF
None
20 Sec
3.7.1 Internal Buzzer
This item allows users to enable / disable internal buzzer of the DVR. If
is selected, the buzzer is activated in response to alarm events. If is
selected, the buzzer is not activated.
3.7.2 Event Icon
This item enables (ON) / disables (OFF) the display of event icons on the
monitor when alarm events occur. The event icons are represented by a
character according to the event types respectively. Refer to the following
table for association of event icons and event types.
Event Icon Event Type
A Alarm in event
M Motion detection event
L Video loss event
3.7.3 Email Notice
The item enables (ON) / disables (OFF) the Email notification of an event.
When an alarm event is triggered and is enabled, an e-mail
concerning the alarm event will be sent.
NOTE: In order to send an event notification e-mail successfully,
ensure that the DVR is connecting to the internet.