ARM Electronics DVRHD - Manual (Page 46)

DVR User’s Manual
45
4.5.2 Dome Protocol Setup
The Dome Protocol item lists the available dome protocols for communicating
with dome cameras connected to the DVR. From the Main menu, select
and press ENTER. The following menu is displayed.
Analog Camera
Analog Camera Select
Dome Protocol
Dome ID
Camera Title
Covert
Brightness
Contrast
Saturation
Hue
Audio Association CH1
None
0
No
0
0
0
0
Yes
To configure dome protocol, select a camera first and set the communications
protocol associated with dome camera using the Direction keys and ENTER.
NOTE: The settings become effective after saving the changes and
exiting from the menu.
4.5.3 RS485 Setup
The DVR controls the dome cameras via RS-485 communication protocol.
The RS-485 parameters of the DVR must be set to the same as the
parameters set in dome camera.
Users are allowed to change the RS-485 settings of the DVR. Select
in Main menu, then select from the System
Setup menu and press ENTER. The following menu is displayed.
RS485 Setup
Unit ID
Baud Rate
Bits
Stop
Parity 224
9600
8
1
None