ARM Electronics DVRHD - Manual (Page 26)

DVR User’s Manual
25
NOTE: Since a VBR file does not have a fixed size, the HDD space
usage cannot be calculated and thus ezRecord function is not
supported for VBR mode. Therefore, if ezRecord is selected as the
preset record configuration, the option of this menu item will
automatically be set as .
3.6.2 Schedule Setup
The Schedule Setup is used to set the day and night time, or weekend
recording schedule. Select from the Record Setup menu
and press ENTER; the following menu is displayed.
Schedule Setup
Day Time Start
Day Time End
Night Time Start
Night Time End
Weekend Schedule
Weekend Start
Weekend End AM 06:00
PM 06:00
PM 06:00
AM 06:00
ON
Fri 18:00
Mon 06:00
• Make appropriate changes of the start time of Day and Night Time using
Direction keys.
• Press ENTER to confirm the settings or ESC to cancel.
• If a weekend record is required, select to enable the Weekend
Schedule in advance and then set the Weekend Start/End time.
• Press ESC to return to previous page.
3.6.3 Preset Record Configuration
The is used to select the preset recording quality and frame
rate. In normal circumstances, it is strongly recommended to set the preset
configuration as . Below table shows the PPS and picture size
under in Half-D1 mode. Please refer to OSD Setup Manual,
Section Preset Record Configuration for more detailed information.
Half-D1 mode (NTSC: 720x240@60PPS; PAL: 720x288@50PPS)
Normal PPS Normal Size Event PPS Event Size
3.75 NTSC
(3.125 PAL)
10 KB / Pic
15 NTSC
(12.5 PAL)
10 KB / Pic