6 event full screen, 7 event duration, 8 per channel config – ARM Electronics DVRHD User Manual
Page 33
DVR User’s Manual
32
3.7.5.3
Alert IP
The Alert IP must match the IP address of the computer installed the CMS.
3.7.5.4
Alert Port
The ports for DVR and the CMS Alert MUST be the same.
3.7.5.5
Alert Interval
Users can define the time interval (1 to 255 seconds) between each alive
message.
3.7.6
Event Full Screen
This function allows the DVR to display the alarm channel in full screen size
when an alarm is triggered. Select
triggered; select
select
Monitor.
3.7.7 Event
Duration
This item determines the duration of the buzzer and Alarm Out relay function
after an alarm is triggered. The available event duration range is from 5
second to 999 seconds.
3.7.8
Per Channel Config
This menu is used to configure the
Per Channel Config
Channel Select
Video Loss Detect
Motion Detect
Motion Detect Indicator
Detection Config
Alarm In
Alarm Out
CH1
OFF
OFF
ON
OFF
ON