Epson C82346 User Manual

Page 72

Note:

To set up and use the card through a shared OS/2 print

queue(s) that will receive print jobs from other workstations,

you must install and select either the IBMNULL or

MSNULL printer driver. For the DEVICE to connect to,

choose a port name from those added in step 3 above (for

example, EPLASER).

To connect the card directly to a workstation(s), you must

install the proprietary OS/2 printer driver.

5. In the EPNET remote print service directory, create an

initialization file called REMPRT.INI. This file is used by

the remote print service at start-up and assigns the remote

printer names to the device port names. The format of the

file is as follows:

Example:

10900701 EPLASER

10900416 PUBSPRT

6. Edit your STARTUP.CMD file and add the following line at

the end:

This line ensures that the remote print service is initialized

each time you start the server. If you wish to start the print

service manually, you can execute the REMPRT3.EXE file

from the OS/2 command prompt.

7. Use the LAN Server Administration facility (NET ADMIN)

to add newly created printers to the list of shared resources.

6-6

using OS/2