Epson C82346 - Manual (Page 45)

5. Highlight your printer name in the Printers list. If there are
many devices on the network, you may have to scroll
through the list to find your printer.
6. Select the network zone that
you want
your printer to appear
in from the Zones list.
Note:
The default zone appears as an asterisk (*) in the Zones list.
7. To use a non-AppleTalk PS printer (all EPSON printers), set
the AppleTalk PS option to Inactive. For AppleTalk PS
printers, make sure the AppleTalk PS option is set to
Active.
8. Click Set to assign your printer to the selected zone.
If you are assigning a zone to more than one printer, repeat
steps 5-7 for each printer.
Your printer will stay in the new zone as long as the zone
is available.
Caution:
If
you changed the AppleTalk PS option, wait at least 30
seconds after clicking the Set button before rebooting your
printer.
9. Click Quit to exit EPSON Zoner.
Be sure to notify all network users of the new
zone
for your
printer. They will have to reselect the rezoned printer in the
Chooser.
3-8 Using Apple EtherTalk