Epson C82346 - Manual (Page 68)

Installing Redirection Software
Follow these steps to install the redirection software:
1. Place the EPSON Net! for OS/2 Installation disk in drive A
(or B) of your server.
2. Open an OS/2 full screen command session.
3. Open the OS2 directory on drive A (or B) and select the
NETBEUI\REDIRECT directory. For example, type CD
NETBEUI, press the Enter key, and then type CD REDIRECT
to select the redirection software directory.
4. Copy the driver software files RPRINT3.EXE and
RSTAT3.EXE to the root directory of the LAN Server file
server.
COPY A:*.* C:\
5. Edit the file STARTUP.CMD in the file server root directory
and insert the following command as the last line:
RPRINT3 (/portname)
Note:
See Chapter 1 for more information about the serial number.
The optional (/portname) designates the port that will be
redirected to the remote printer specified by its serial
number . If no optional port name is
defined, the program assumes LPT1 as the port.
6-2 Using OS/2