Configuring the printer – Epson C82346 User Manual

Page 47

7. Reboot your system for the installation to take effect.

Note:

To verify that the DLC protocol is installed correctly, check the

list of installed Network Software in the Networks dialog box.

Configuring the printer

Follow these steps to configure the printer:

Select Print Manager from the Main group.

Choose Create Printer from the printer menu at the top of

the screen. The Create Printer dialog box appears.

Enter a name for the printer in the Printer Name field.

Select the printer driver from the Driver pull-down menu.

Select Other from the Print To pull-down menu. The Print

Destination dialog box appears.

Choose (HP Network Port) from the Available Print

Destinations list. The Add an HP Network Peripheral Port

dialog box appears.

Note:

If HP Network Port does not appear as a choice in the dialog box,

then the

DLC transport protocol and driver are

not

installed. Go

to the Installation for Windows NT section above for detailed

installation instructions.

Enter a name for the port in the Name box.

Note:

The name must not be identical to an existing port, such as

LPT1, or any other existing DOS device.

4-2

Using Windows NT