Epson C82346 - Manual (Page 22)

Using Novell Net Ware
The Ethernet Card can function as a print server or remote
printer running under Novell NetWare. It also has an Auto
Print Server/Remote Printer mode that allows it to switch
modes depending on network conditions. The following
sections describe how to configure the interface card to operate
in each of these modes.
Ethernet Card Configuration Software
The Ethernet Card comes with EPSON Net! for NetWare,
EPSON’s proprietary network printer management utility
program. You must configure the card using EPSON Net!. The
disk provided with the card includes a Windows-based
version and a DOS version of this easy-to-use, menu-driven
program.
Use the appropriate version to set up your card as a print
server or a remote printer. You can use EPSON Net! to add or
delete queues, change port configurations, rename the print
server, configure the interface to service queues on other file
servers, and other tasks.
Before setting up
First decide whether you want to use the interface card as a
dedicated print server or remote printer, or in Auto Print
Server/Remote Printer mode.
Install the Ethernet Card and connect it to the network
following the instructions in Chapter 1. The card must be
connected to the network and the host printer must be
turned on before setting up.
Using Novell Net Ware 2-1