Epson C82346 - Manual (Page 31)

Changing the configuration in Print Server mode
In Print Server mode, you can use the EPSON Net! utility to do
the following:
Rename the print server
Enter a password
Set the queue polling time
Before editing the Ethernet Card configuration with EPSON
Net!, you must first log on to the network with supervisor
privileges.
Renaming the print server
Always use EPSON Net! to rename the printer on the master
file server. Never use PCONSOLE to perform this operation.
1. Access the NetWare config dialog box, and type the new
print server name in the Print Server name box. You can
enter up to 32 characters. The following characters are not
allowed: Ctrl and space. A period (.) is
allowed if it is not the first character.
2. Click Save.
Note:
If the first part of the new printer name is the same as the product
name, the last four characters of the the hexadecimal serial number
will affix themselves automatically to the end of the new name.
2-10 Using Novell Net Ware