Epson C82346 - Manual (Page 39)

Renaming Your Printer
Because your printer has a default name, you will need to
rename it to avoid having multiple printers on the same
network with the same name. Choose any name you like for
your printer.
The EPSON Namer utility renames a selected AppleTalk
device (printer). With this program, you can rename printers
located in different zones on the network, including the local
zone.
Note:
If
your printer is to be serviced by a print spooler, you should first
rename the printer before configuring the spooler.
Using EPSON Namer
To rename your printer, first copy the EPSON Namer program
from the EPSON Net! for Macintosh floppy disk to your hard
drive.
Follow these steps to rename your printer:
1. Make sure the Ethernet Card-equipped printer is turned
on
and ready. After turning on the printer, wait at least a
minute to allow for PostScript initialization.
2. Insert the EPSON Net! for Macintosh disk into your
computer, and double-click on the disk icon if necessary.
Copy the utility to your hard disk. You can also run the
program from the floppy.
3-2 Using Apple EtherTalk