Epson C82346 - Manual (Page 10)

lntroduction
The C82346* EPSON ® Type B Ethernet Interface Card is a
combination of hardware and software that lets you connect an
EPSON printer equipped with an optional Type B interface slot
directly to your network. Just install the Ethernet Card into
your printer’s optional interface slot (see your printer guide or
contact your EPSON dealer for applicable models), and
connect it anywhere on your network.
Use the EPSON Ethernet Card software to quickly and easily
set up the interface as a print server or remote printer on a
Novell ® NetWare ® , EtherTalk ® (Apple ® ), Windows’ NT (with
TCP/IP), or IBM ® OS/2 LAN ® Server network. Utility
software is not needed for installation on a Windows NT (with
DLC Transport protocol) or UNIX network.
The Ethernet Card can be directly connected to a 10BASE or
10BASE-T network. It automatically selects the connected
network when powered on. In addition, it supports IEEE 802.2,
IEEE 802.3, and Ethernet II network protocols.
Supported Network Protocols and Features
The Ethernet Card supports the following network protocols:
Novell NetWare
Supports NetWare 2.x, 3.x, and 4.x (Bindery Emulation
Mode).
Allows your printer to function as a print server or remote
printer. An additional mode, Auto Print Server/Remote
Printer, automatically switches between print server and
remote printer modes, depending on network conditions.
Services up to 32 print queues on up to eight file servers.
Introduction 2