Epson C82346 - Manual (Page 48)

8. Select LAN Hardware Address (Node Address) from the
Card Address list. This address matches the one listed
under Node Number on the status sheet.
9. Click the Timer button and select the Job Oriented option.
Then
click OK.
10. Click OK to exit the Add a Network Peripheral Port dialog
box.
Note:
You may share the new printer if you wish. To do so, click the
Share the Printer on the Network box. The share name
defaults to the printer name and can be changed if necessary.
11. Click OK to exit the Create Printer dialog box. A dialog box
from the selected model’s device driver appears.
12. Set any printer-specific options, and click OK.
You are `now ready to print.
Installing on Windows NT with TCP/IP Support
Before you can set up the software, the interface card must be
installed in the printer and the printer must be connected to the
network and turned on.
Requirements
To use the Ethernet Card with LPR (TCP/IP), you need to
install the standard TCP/IP software in Windows NT and set
the IP address for the Ethernet Card with EPSON Net!.
See the Windows NT User’s Guide for more information on
using Windows NT.
Using Windows NT 4-3