Epson C82346 - Manual (Page 65)

Setting up for HP-UX System
There are two methods of printing from HP UX, ftp and rlp
(lpr). Both are set up using SAM. Enter the IP address and Host
name in the /etc/hosts file before starting SAM.
RLP Setup
On the printer definition page of SAM, use the following
settings:
Printer Name: Any name
Remote System Name: Use the host name in /etc/hosts
Remote Printer Name: nothing or ‘Ipa’, ‘Ipaf’ etc if using
filters.
Remote Council Model: /bin/true
Remote Status Model: /bin/true
Make System Default: Enter as appropriate
Printer Class: Leave out
Restrict Council: Leave out
Remote Printer on BSD system: Leave out
Use ‘lpd -d printer name’ or rlp to print.
FTP SCRIPT
Type: lpshut
lpadmin -p{spoolername} -m{modelscript}
-v/dev/null
accept {spoolername} enable {spoolername)
lpsched
Then create a model script:
vi/usr/spool/lp/model/lan.model
and enter:
MODEL=‘basename $0’
REALMODEL=‘echo $0 /sed -e “s%$MODEL %model.lan
/$MODEL%“’
Using UNIX 5-13