AML MT7570 Vehicle Mount Computer User Manual
Page 12
3-3
USER’S GUIDE
MT7570 Vehicle Mount Terminal
Connecting Power
The MT7570 is shipped with a standard DC Accessory Plug which can plug directly into a standard
12VDC Accessory socket found on many mobile vehicles. This plug contains a 5AMP slow blow fuse
which can protect the device from short circuits. If this plug is removed, it is recommended that the input
be protected with a 5AMP slow blow fuse.
The MT7570 is designed to accept a wide range of voltage inputs and still work correctly. The standard
model accepts voltages from 9VDC up to 36VDC with a 50VDC surge rating. The optional model will
accept voltages from 36VDC up to 75VDC with a 100VDC surge rating. The MT7570 is fully protected
internally from short circuits or over current conditions. The MT7570 terminal contains self-resetting
internal breakers; the power and the short circuit must be removed for these breakers to reset.
Description of the Power Cord (Black Cable from bottom of terminal)
1.
White Wire / 9 to 36VDC or 36 to 75VDC / 3 Amps maximum draw from vehicle
Note: This line must be fused (5 Amp Max) DO NOT wire directly to the battery.
2.
Black Wire / GND
Optional Keyboard Mounting
MT7570 Keyboard Mounting
with optional keyboard