Alinco DJ-X3 - Manual (Page 44)

3
Useful
Functions
o
f
the
DJ-X3
44
■
PRIO (Priority) Watch Function
This function monitors two frequencies alternately.
Every five seconds, the DJ-X3 momentarily switches from the frequency in the
VFO mode to the frequency in the Priority channel.
In the Set mode, select "Pr."
· Select a Priority channel No. from 0 to 7 by rotating the dial.
· Press the [FUNC/ENTER] key, to leave the Set mode. The Priority Watch
function is now active.
Tip
· Scanning is not available during the Priority Watch.
· If the DJ-X3 receives a signal on the Priority channel, receiving time will be
extended for 2 seconds.
How do you cancel the Priority Watch?
Press either the [SCAN(SCRT)] key or the [FUNC/ENTER] key during the
Priority Watch.
■
Beep Function
The beep sound which is heard when you operate keys on the DJ-X3 can be turned
OFF.
In the Set mode, select "bEEP."
· Select ON/OFF by rotating the dial.
F
F
Priority channel