Alinco DJ-X3 - Manual (Page 33)

33
3
Useful
Functions
o
f
the
DJ-X3
Caution!
· Operate in a quiet environment where doors and windows are closed. It is
hard to find a listening microphone in a noisy environment.
· Depending on the modulation setting, this function may not work
correctly.
· When the battery voltage is low, this function does not work normally. Be
sure to recharge the battery pack completely, load new AA batteries, or
supply sufficient voltage from the DC power supply.
· Since this function detects a bug’s signal by the presence or absence of a
howling noise, a loud sound may be emitted during detection; however, it
is not a malfunction.
· Detection area is approximately 15 square meters (18 square yards)
depending on the type of listening microphone.
How do you stop detecting?
Turn the power OFF, then turn the power ON while holding the [MONI(ST/SK)]
key down.
Tip
When you turn the power on while holding the [MONI(ST/SK)] key down, but the
Bug Detector function doesn't operate, the following reasons may be
considered: Bank link scan mode is not selected or there is no memory data in
the area. If so, select the bank link scan mode and program at least one channel
in the area.