Alinco DJ-X3 - Manual (Page 40)

3
Useful
Functions
o
f
the
DJ-X3
40
■
Setting Bank Link
This is the setting for the "Bank link scan", which scans specified multiple
banks.
You can select up to 5 banks from 10 (0 to 9) programmed banks.
In the Set mode, select "bL."
· Select bank link No. by rotating the dial.
· Select a bank to link by pressing the [BANK(1M/10M)] key. One bank can be
assigned to each bank link No. 0-4.
Tip
· When only one bank is set to the bank link, if you execute the bank link scan,
only one bank will be scanned.
· For more information about bank link scan, see "Memory Scan." (P.27)
· Scanning while the Bug Detector operates reflects the settings of the bank link.
· The Bug Detector detects a listening microphone from bank linked memories.
· When using the Bug Detector, corresponding banks must be linked.
F
Bank link No. Bank No.